Video Input
- 4 comp inputs, 1.0 Vp-p, BNC, 75 Ohm, NTSC/PAL
|
Hardware
- CPU:32 Bits RISC Processor.
- ROM: 8M Bytes Flash ROM.
- RAM: 32M Bytes SDRAM.
- Watch Dog: Chip to monitor out tolerance system voltage and abnormal program execution.
|
Connection
- Network:10Base-T/100Base-TX Ethernet networks(RJ-45).
- Serial port:RS-232(DB-9)
- Two LEDs to indicate network and power/system status.
- GPIO with fully opto-isolated four alam inputs and one relay output (terminal block).
|
Video
- Frame rate:25/30 fps per channel (100/120 fps four-channel).
- Video compression:Motion JPEG, 5 video compression levels.
- Up to 8 simultaneous users.
- Max resolution: 768 x 576, 704 x 480 (NTSC), 704 x 576 (PAL).
- Video adjustment: Brightness, Contrast, Hue, Saturation, Quality Level adjust.
|
Protocols
- Triggered by: Time (Frequency) / GPIO Input / Motion Detection.
- Action:
- Store image to internal buffer.
- FTP image to remote site.
- E-mail image to specify account.
- Relay output to control external devices.
|
Installation
- Assign IP address: on-line IP setting.
|
Software Upgrade
- Flash memory allows firmware updates over the network using HTTP.
|
System Requirements
- Standard browser such as IE 5.x or above, and Navigator 4.x running on Win95 / 98 / NT, Linux, etc.
|
Security
- Three-layer Password Protection.
|
Environment
- Operating Temperature 5 ¢X ~ 50 ¢XC (40 ¢X ~ 125 ¢XF) Operating Humidity 20~80%.
|
Input Voltage
|
