Dual Mode Digital Quad - DQP-A4 / DQP-W1A3 / DQP-W2A2
DQP-A4
DQP-W1A3
DQP-W2A2

The Dual Mode Digital Quad, DQP-A4 / DQP-W1A3 / DQP-W2A2, is your ultimate USB based security system. It is by far the fastest USB 1.1 digital surveillance system in the world. When you connect all four cameras, either through wired or wireless means, you still achieve 12-15 frames per second at CIF (320x240) resolution per camera during preview mode. Each camera view is at most VGA (640x480) resolution.

Have you ever wondered why the DQP-A4, DQP-W1A3, and DQP-W2A2 are called Dual Mode Digital Quads? Well, it is because you do not necessary need to connect any of them to your PC in order for them to work. Rather, the DQP-A4, DQP-W1A3, and DQP-W2A2 are also non-PC as well. That is, if you do not wish to connect any of them to your PC, all you need to do is to connect them to a 5V DC power outlet and there is your normal quad processor where you get to monitor everything on your TV or monitor without a PC!

With DQP-A4, you are able to connect up to four CCTV or analog cameras while watch for any intruders on your PC. You can also monitor cameras on your TV or monitor with the video output port that is situated at the back of the DQP-A4.

The DQP-W1A3 allows you to connect one wireless camera (2.4 GHz) and three CCTV cameras at the same time. You are able to monitor using your PC or a TV monitor via the USB port or the video output port respectively.

The DQP-W2A2 allows you to connect two wireless cameras (2.4 GHz) and two CCTV cameras at the same time. Similar to the DQP-A4, the DQP-W2A2 also has a video output port at the back that allows you to monitor on a TV monitor.

Through surveillance software control, you can remotely monitor via a standard internet browser, get notified of any intruders entering your home, property via e-mail or phone, etc. making the USB Dual Mode Digital Quad, DQP-A4, DQP-W1A3, or DQP-W2A2 your ultimate digital surveillance system.

Features:

  • Up to 4 camera inputs, one-page quad display
  • 1 analog (composite) output to TV, monitor
  • Full Quad display function can be operated from computer through USB port
  • Independent brightness, contrast, color and tint adjustments for every channel, controlled from local or remote PC
  • Front panel design for local monitoring
  • Security software support

- Main features

- Additional features

Specifications:

Model
DQP-A4
DQP-W2A2
DQP-W1A3
PC Interface
USB Rev. 1.1
Video Input 4 composite (analog) inputs 2 RF channels + 2 analog inputs 1 RF channel + 3 analog inputs
Video Standard NTSC, PAL, SECAM
Video Output 1 composite output + 1 USB output
Capture Rate 12-15 fps at CIF (352x288), 15 fps at VGA (640x480)
Frame Size CIF (352x288) to VGA (640x480)
Software Interface Microsoft WDM driver, TWAIN interface
O/S Support Microsoft Windows 98 SE, 2000, ME, XP
Power USB +5V, and DC +5V
Operating Temperature 0 C to 50 C degrees (Non-Condensing)
Storage Temperature -10 C to 60 C degrees (Non-Condensing)

Minimum System Requirements:

  • A computer system equipped with Intel Pentium II 350 MHz CPU or above
  • 1 Free USB port
  • 64 MB of RAM
  • Operating System: Microsoft Windows 98 SE, 2000, ME, XP
  • 100 MB of free hard drive space
  • CD-ROM or DVD-ROM drive
  • A 56K (or above) internet connection is required for the application of remote surveillance

* All specifications are subject to change without notice
* All brand names and tradmarks are the property of their respective owners

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Best viewed under 800x600 resolution in Internet Explorer 5.0 or above.
All trademarks and logos shown herein are the property of their respective owners.
 Copyright© 2002 AME Optimedia Technology Co., Ltd. All Rights Reserved.